 |
| Arai helmets. 2008 Arai motorcycle helmets, Buy Arai motorcycle helmets from the top helmet stockist in Sussex Motorcycle helmets in Sussex
|
| |
Arai helmets adorn the heads of the most well known motorcycle racers in the world and have a rich heritage of of providing arguably the best protection that money can buy.
Arai helmets are not cheap and they do not produce a range of helmets to suit a budget, rather they make the helmets to their own exacting standards and then price them, there is in effect no compromise with the Arai brand and with this product the phrase 'you get what you pay for ' is a perfect example of this.
Why should you opt for one of these helmets over any other brand?
With the the demise of the BSI British kite mark for safety products pertinent to motorcycle helmets a few years back, the ECE 2205 standard was introduced, often regarded as a lesser standard than the old BSI standard, all Arai helmets by far and away exceed the new criteria required.
Arai’s motorcycle helmets exceed the ECE 22.05 Europe-wide safety standards on impact absorption. Arai choose nine separate points on the helmet shell and subject each of those areas to up to four impact tests, some 36 impacts in total.
Arai don't have to test each shell so rigorously to meet the regulations, but they test way beyond the accepted industry standard because they believe every Arai helmet must offer the highest level of crash protection.
You can follow the link to the official Arai site at the bottom of the page for a more in depth read should you wish, but you can only buy from approved Arai dealers such as ourselves. We invest in the stock, believe in the product, undertake regular training and can offer a full spares, warranty and back up service. In our opinion if you want the best in comfort, pretection and fit, these helmets are the brand you should ask about and at the very least try our no obligation fitting service.
|
|
This page last updated 30th October 2008
Team
Alf's Endurance racing.
Le Mans '05
Riders Chris Burns John Barton and Pete Jennings Only used and
reccommend Arai helmets.
Bol
D'Or '05
Riders, John Barton,
Tom Montano and Craig Mclean only used and reccommend Arai Helmets
Le Mans '08
Arai helmets worn by Guy Martin - 'Mint they are'
|
| |
RX7 Corsair
'Haga' & 'Nakano' 'Shuriken' |
- Structural net composite construction (SNC)
- Ring shaped strengthening in lower section
- Slim, oval outer shell - lower centre of gravity
- Triple density inner shell
- Top air diffuser - moves 15 litres of air per minute
- Side exhaust vents and Improved breath deflector
- Aeroflap - reduces wind noise and turbulence
- Powerful chin vent with enlarged duct access
- Fully washable and removable Dry Cool® interior
- Free flow system (FFS) - reduces draft and wind noise
- Removable skull cap and cheek pads available in 6 sizes
- Lever release visor removal system (LRS)
- Aerodynamic recessed visor holder system
- Patented visor brow ventilation ducts
- Aerodynamic 3D Pinlock® ready visor with de-mist visor lock
- Pinlock® visor insert included
- Double 'D' ring fastening system ensures correct strap tension at all times
|
|
|
There are 11 different designs to choose from including the two above, all are race replica designs plus plain colours are also available
|
| |
|
|
| |
|
|
| Prices start from £449.95 for a plain colour to £499.95 for a full on race replica.
Please call us for stock availability.
We have some previous seasons colours at discounted prices. - again call our clothing department or e-mail Paul |
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.)
Ask for details about Hopkins MotoGP Corsair replica - available shortly |
| |
VIPER
'Sinister' & 'Banda' red |
- Super complex laminate construction (SCLC)
- Ring shaped strengthening in lower section
- Slim, oval outer shell
- Triple density inner shell
- New double delta 3 rear duct ventilation system
- Side exhaust vents
- Improved breath deflector
- Aeroflap - reduces wind noise and turbulence
- Powerful chin vent with enlarged duct access
- Fully washable and removable interior
- Free flow system (FFS) - reduces draft and wind noise
- Removable skull pad and cheek pads available in 6 sizes
- Lever release visor removal system (LRS)
- Aerodynamic recessed visor holder system
- Patented visor brow ventilation ducts
- Aerodynamic 2mm polycarbonate Pinlock® ready visor with de-mist visor lock
- Pinlock® visor insert included
- Double 'D' ring fastening system ensures correct strap tension at all times
|
|
|
| Other
designs stocked |
Over twenty different designs and colour ways to suit whatever bike or clothing you have are available to order if not available from stock. If in the UK we can generally supply for next day delivery |
|
|
| |
|
|
| Prices start from £329.95 for a plain colour to £399.95 for a full graphic version.
Please call us for stock availability.
We have some previous seasons colours at discounted prices. - again call our clothing department or e-mail Paul
|
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.) |
| |
|
|
|
| |
CONDOR
'St.George' & 'Stella' blue |
- Super fibre construction (SFC)
- Ring shaped strengthening in lower section
- Slim, oval outer shell
- Triple density inner shell
- Delta duct inlet vent and exhaust vents
- Controlled chin ventilation
- Fully washable interior
- Free flow system (FFS) - reduces draft and wind noise
- Lever release visor removal system (LRS)
- Aerodynamic recessed visor holder system
- Patented visor brow ventilation ducts
- Aerodynamic 2mm polycarbonate Pinlock® ready visor with de-mist visor lock
- Double 'D' ring fastening system ensures correct strap tension at all times
|
|
Other designs stocked
Ten different designs and colour ways to suit whatever bike or clothing you have are available to order if not available from stock. If in the UK we can generally supply for next day delivery |
|
| |
|
|
Prices start from just £219.95 for a plain colour to £279.95 for a full graphic version.
Please call us for stock availability.
We have some previous seasons colours at discounted prices. - again call our clothing department or e-mail Paul
|
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.)
|
| |
| Chaser -' Leopard' & 'camouflage' green |
- Super fibre construction (SFC)
- Ring shaped strengthening in lower section
- Triple density inner shell
- New 'air conductor' ergo duct venting system
- Side exhaust vents
- Improved breath deflector
- Powerful chin vent with enlarged duct access
- Fully washable interior
- Free flow system (FFS) - reduces draft and wind noise
- Removable cheek pads available in 5 sizes
- Lever release visor removal system (LRS)
- Aerodynamic recessed visor holder system
- Patented visor brow ventilation ducts
- Aerodynamic 2mm polycarbonate Pinlock® ready visor with de-mist visor lock
- Pinlock® visor insert included
- Double 'D' ring fastening system ensures correct strap tension at all tim
|
|
 |
| Other
designs stocked |
Over twenty different designs and colour ways to suit whatever bike or clothing you have are available to order if not available from stock. If in the UK we can generally supply for next day delivery
|
|
|
| |
|
|
Prices start from just £289.95 for a plain colour to £349.95 for a full graphic version.
Please call us for stock availability.
We have some previous seasons colours at discounted prices. - again call our clothing department or e-mail Paul
|
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.)
|
| |
- Complex laminate construction (CLC)
- Triple density inner shell
- Air diffuser and delta duct top inlet vent
- Fully washable interior
- Removable skull cap and cheek pads available in 6 sizes
- Lever release visor removal system (LRS)
- Patented visor brow ventilation ducts
- 2mm polycarbonate visor
- Double 'D' ring fastening system ensures correct strap tension at all times
|
|
 |
|
| |
|
|
| This has still got to be the best open face helmet that money can buy.
Priced at £299.95 for both colour options, - glittering white and pearl black
Please call us for stock availability.
Huge tech, sumptuous comfort,
large chin length retractable visor, washable and removable
multri sized lining with the venturi from the RX7 Corsair
to keep a cool head.
|
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.)
|
| |
|
- Fibre complex laminate construction (FCLC)
- Triple density inner shell
- Fully washable interior
- Removable peak (sun shield peak optional extra)
- Double 'D' ring fastening system ensures correct strap tension at all times
|
|
 |
|
If you've got this far and would like to know more or wish to check out all the colour options available. Visit us in store for a free brochuure or connect to the official Arai UK site here
|
|
|
| If
you insist on wearing an open face helmet. This model by Arai
has to be the one. As with all the Arai range it is comfortable,
made to the highest spec and just exudes quality.
|
Remember to claim your 10% discount on any of the Arai helmet range when you are looking for kit having purchased either a new or used machine from us.
(Offer only applies at time of machine purchase.)
|
| |
|
|
|
